exhaust mandifold
Thread Starter
|
New User
Joined: Jan 2009
Posts: 16
Likes: 0
From: newton
exhaust mandifold
hello. Well im getting ready to pull my engine. Its starting to finaly get warmer after a very harsh winter here in the mid west. I am so glad to finally get some warm weather. Well what im posting a thread for is ... i was wondering if anyone had a exhaust manifold for a 223 engine, its a six cylinder. Mine has a huge crack in it and the best welder i know said its junk so im starting from scratch anyone that has a manifold that will fit or info on wat can fit or any help at all please let me know
thank u for some help!!!
thank u for some help!!!
Thread Starter
|
New User
Joined: Jan 2009
Posts: 16
Likes: 0
From: newton
hello. Well im getting ready to pull my engine. Its starting to finaly get warmer after a very harsh winter here in the mid west. I am so glad to finally get some warm weather. Well what im posting a thread for is ... i was wondering if anyone had a exhaust manifold for a 223 engine, its a six cylinder. Mine has a huge crack in it and the best welder i know said its junk so im starting from scratch anyone that has a manifold that will fit or info on wat can fit or any help at all please let me know
thank u for some help!!!
thank u for some help!!!
Freshman User
Joined: Jan 2009
Posts: 28
Likes: 0
From: Cincinnati Ohio
I don't know about your welder friend, but I welded my exhaust manifold and it's fine....
And I didn't use any pre heat and I pinged the weld immediately after welding and with only a propane torch for post heat while cooling from the weld. Used a Mig 110vlt. It can be done.
And I didn't use any pre heat and I pinged the weld immediately after welding and with only a propane torch for post heat while cooling from the weld. Used a Mig 110vlt. It can be done.
Thread Starter
|
New User
Joined: Jan 2009
Posts: 16
Likes: 0
From: newton
Hi julie! im new at this this is my second post im not sure how to email them. wat do i use after like 51PanelMan or is that the whole address? thank u julie
Senior User
Joined: Oct 2008
Posts: 214
Likes: 0
From: Kansas City, MO
trotskie10, if you click on the "Private Messages" link on the upper right of your screen, it will take you to where you can send messages. Half way down on the left you'll see "Send New Message." Click on that, and then type the name into the recepient name box. Nothing goes after their name. no @ or anything.
Thread Starter
|
New User
Joined: Jan 2009
Posts: 16
Likes: 0
From: newton
trotskie10, if you click on the "Private Messages" link on the upper right of your screen, it will take you to where you can send messages. Half way down on the left you'll see "Send New Message." Click on that, and then type the name into the recepient name box. Nothing goes after their name. no @ or anything.
ok thank u tiger_698! i just joined so i am really new at this and im doing my first project truck right now so im new at everything haha
thanks!
Trending Topics
Senior User
Joined: Oct 2008
Posts: 214
Likes: 0
From: Kansas City, MO
You're welcome. I'm still new and trying to learn all the in's and out's too. And I am about 1/4 of the way done with my first project. It's a great group of people on here. They're all extremely helpful. In fact, without their help, I probably would have given up and sold my project.
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
10 Fords to Drive Before You Die
Joe Kucinski
3 Best / Worst Features Of The 2025+ Ford Expedition
Brett Foote
10 Ways Ford is LOSING to the Competition
Joe Kucinski
Top 6 Best Deals Available on New Fords & Lincolns Right Now
Brett Foote
This Hennessey Takes the Expedition Tremor's Off-Roading Capability to the Next Level
Verdad Gallardo
Top 10 Fords at 2026 Carlisle Ford Nationals
Joe Kucinski
3 Best / 3 Worst Parts of Modern Ford Ownership
Brett Foote
10 Amazing Upgrades That Solve Common Ford Truck Owner Headaches
Pouria Savadkouei
Every 2026 Ford Engine Explained
Brett Foote
Thread Starter
|
New User
Joined: Jan 2009
Posts: 16
Likes: 0
From: newton
You're welcome. I'm still new and trying to learn all the in's and out's too. And I am about 1/4 of the way done with my first project. It's a great group of people on here. They're all extremely helpful. In fact, without their help, I probably would have given up and sold my project.
everyone knows so much its really cool. yep they all seem very helpful and nice people. ok sweet i am just getting started on my first its overwhelming sometimes but this place is a HUGE help and i already have gotten a lot of help thank u for talking that helps with the messaging and to know theres others out there haha