My 140v IDM mod
Thread Starter
|
Elder User
Joined: Dec 2008
Posts: 657
Likes: 0
From: Ocala
My 140v IDM mod
Ok, got the 140v IDM done today thanks to Cookie88 for the resistors. Much smoother idle with easier start. Turbo seems to spool faster and definitely whistles a lot louder at an idle. And me and the guy who works with me both noticed a difference in acceleration. I had a 100v IDM so if ya'll already have the 110v's your changes might not be as drastic as mine. Cannot tell you as to MPG changes because I havent driven far enough yet to tell but will let you know. Also, I took pics during the install and will post them tonight on my home computer. I definitely recomend doing this. If you have any mechanical ability at all and can solder you can perform this at your kitchen table.
Also, Cookie88 sent me 2 resistors, I only used one. PM me with your address and I'll drop it in the mail to you.
Also, Cookie88 sent me 2 resistors, I only used one. PM me with your address and I'll drop it in the mail to you.
