steering wheel
Posting Guru
Joined: Dec 2006
Posts: 1,081
Likes: 0
From: Gladwin,Mi
this has been in the back of my mind.....I was originally looking for an '08 SD steering wheel....but the splines on the shaft are a different size......but if you track down the wires in the column and put the switches on the dash it "might" work...it has been too cold to look into it...so its on the spring time to do list...steering wheel is the easy part,the cruise is what will be questionable
Senior User
Joined: May 2007
Posts: 248
Likes: 1
Never heard anyone say it was too cold in MI. You must be one of them fureners from down South!! Heck, I went to school with 2 guys from Mucwonogo WI and they complained that 5 degrees was too hot to work in. I'd stick with the stock, even if they don't hold together that well.
Posting Guru
Joined: Dec 2006
Posts: 1,081
Likes: 0
From: Gladwin,Mi
Never heard anyone say it was too cold in MI. You must be one of them fureners from down South!! Heck, I went to school with 2 guys from Mucwonogo WI and they complained that 5 degrees was too hot to work in. I'd stick with the stock, even if they don't hold together that well.
