Big Bronco FAQs
#121
Hello. Not just new to the site but just bought my first bronco too. I came across a 95 Eddie Bauer 5.0 in excellent shape for a 22 year old 4x4. she had 31 10.50s but in the shop now getting a 2" skyjacker sus lift and 33 Mickey Thompsons and a set of 17" wheels. Looking forward to looking through the site. Oh btw first thing I had to do was loose those factory steps.....awful.
#122
What am I missing?????
I ready thru the FAQ and the actual first FAQ does not appear until about post 78 and it is the only one. Why is this a "Read First" stickie if none of the posts actually give answers to FAQ. The responses say to post a new post. There is nothing is this other than "start a new post"
I thought this would be a brain dump of information like in the truck FAQ.
Whine is over.
I thought this would be a brain dump of information like in the truck FAQ.
Whine is over.
The following users liked this post:
#123
I agree completely black & blue 78/9
OK I have 93 bronco 4x4 manual transmission with a 302 I just bought for 500 because it needed a fuel pump and carrier bearing but turns out the pump was just dsiconnected and the rear end was real stiff but it's all good now. Well anyway it has engine block warmer but I can't find where to plug it in. That's all I'm lacking to be complete. Can you steer me. A direction?
#124
I ready thru the FAQ and the actual first FAQ does not appear until about post 78 and it is the only one. Why is this a "Read First" stickie if none of the posts actually give answers to FAQ. The responses say to post a new post. There is nothing is this other than "start a new post"
I thought this would be a brain dump of information like in the truck FAQ.
Whine is over.
I thought this would be a brain dump of information like in the truck FAQ.
Whine is over.
#125
OK I have 93 bronco 4x4 manual transmission with a 302 I just bought for 500 because it needed a fuel pump and carrier bearing but turns out the pump was just dsiconnected and the rear end was real stiff but it's all good now. Well anyway it has engine block warmer but I can't find where to plug it in. That's all I'm lacking to be complete. Can you steer me. A direction?
#126
BroncoNube here, never had a Bronco. My wife doesn't want to drive an F250 so I thought a Bronco might be good for her. I read the Infogalactic page on Broncos and see that there were many changes over the years...
My question is which year is the best Bronco? given that I want that manual transfer case lever on the floor but nice comfort stuff for my wife? Is this the right forum to ask in? I read that the AOD can be beefed well for about $3k. The E4OD is spendier to beef. I'd rather have the big Windsor block, but a crate motor would fix any weak motor issues. Good lift kits are still out there.
What do you think? Which is the best year?
My question is which year is the best Bronco? given that I want that manual transfer case lever on the floor but nice comfort stuff for my wife? Is this the right forum to ask in? I read that the AOD can be beefed well for about $3k. The E4OD is spendier to beef. I'd rather have the big Windsor block, but a crate motor would fix any weak motor issues. Good lift kits are still out there.
What do you think? Which is the best year?
#127
Bronco New here. But have been on this site since 2003. Finally sold off my 93 F350 Diesel 4door. Thing was huge, and was taking up driveway while just sitting. With the truck sale, the buyer sold me a 1988 Bronco. Needs help, 302 motor can't hold oil pressure, steering is crap, A/C just died. But the rear window works fine so I like it.
#129
Yes, folks, many apologies but after many years, I am unable to keep up the hosting and maintenance on the site. I still have the entire list of information and will happily forward it to anyone who may want it but I no longer have the time to focus and carry on the maintenance of the site. Again, sincerest apologies.
#130
Yes, folks, many apologies but after many years, I am unable to keep up the hosting and maintenance on the site. I still have the entire list of information and will happily forward it to anyone who may want it but I no longer have the time to focus and carry on the maintenance of the site. Again, sincerest apologies.
#133
But it's in the Wayback machine so it might not even really be necessary:
https://web.archive.org/web/20180309...broncofaq.com/
https://web.archive.org/web/20180309...broncofaq.com/
#134
#135