upper control arm bushings
Thread Starter
|
Senior User
Joined: Jun 2003
Posts: 446
Likes: 0
From: western pa,zelienople
upper control arm bushings
I am going to be replacing my upper control arm bushings. Are there any tips, or clues, or a complet step by step proces that would help me out.
94 all wheel drive 4.0
Thank You
94 all wheel drive 4.0
Thank You
Lead Driver
Joined: Sep 2003
Posts: 7,014
Likes: 207
From: SoCal
Post Fiend
Joined: Apr 2005
Posts: 5,720
Likes: 5
From: Washington state
more help with pictures
aero upper bushings
Fig. 1: Exploded view of the upper control arm and front crossmember-1986-90 models (1991-96 same except for torque specifications)
aero upper bushings
Fig. 1: Exploded view of the upper control arm and front crossmember-1986-90 models (1991-96 same except for torque specifications)
Elder User
Joined: Aug 2003
Posts: 624
Likes: 0
From: Houston, TX
I've done this, and its pretty straight forward. I can remember two gotchas though. Number one, I had to put a pretty good extension on my 1/2" breaker bar to bust loose those nuts on the bottom. Number two, getting the old bushings out of the upper control arm bracket. After many different attempts, I finally took a cold chisel and split them. Seating them was a piece of cake with two oversized sockets.
Klaus Cook
Houston, Texas
Klaus Cook
Houston, Texas
Thread
Thread Starter
Forum
Replies
Last Post
