FNG question
Thread Starter
|
New User
Joined: Dec 2008
Posts: 9
Likes: 0
From: Norfolk, VA
FNG question
Just bought my 1st diesel an 04 250. It's starting to get cold so looking into the block heater thing. Crawled under the truck and it has what appears to be a factory/dealer installed cord. The problem is the way it's routed I can't follow it and I can't locate the plug. Is there a standard place they stash the thing. 
Postmaster
Joined: Oct 2008
Posts: 3,924
Likes: 6
From: Richmond BC
u cant find the business end of the plug or u cant seem to find were it attachs to the engine ???
most trucks with block heaters tend to have em wrapped/zapstrapped to the front bumper center area..
most trucks with block heaters tend to have em wrapped/zapstrapped to the front bumper center area..
Thread Starter
|
New User
Joined: Dec 2008
Posts: 9
Likes: 0
From: Norfolk, VA
block heater
it was the 110v end I couldn't find. However I found the info on the tech side of FTE and just went out and found it. It does not however just "pull out" like the article says. But a couple scraped knuckles and I got it. Thanks for the reply.
