Firewall knockouts...

Reply Subscribe

Thread Tools

Search this Thread

Dec 21, 2008 | 07:26 PM

triskit16

Thread Starter

Postmaster

Joined: Sep 2008

Posts: 3,220

Likes: 0

From: VA

Firewall knockouts...

I know there is the firewall knockout that is where the clutch would normally go and Ive found it on the inside. Only problem is, I cant see where it is on the engine side! I cant really see much passed where the main harness goes through the firewall. Im afraid if I push the knockout through I would be able to find it and put it back in place!

Is there something I need to take out in order to have better access to it?

Thanks!

Dec 21, 2008 | 07:46 PM

Bigfwt04

Elder User

Joined: Sep 2008

Posts: 595

Likes: 0

If you push it out from the inside you will see it in the engine bay. It is behind a harness so it is a little hard to see till you push it through.

Dec 21, 2008 | 07:56 PM

triskit16

Thread Starter

Postmaster

Joined: Sep 2008

Posts: 3,220

Likes: 0

From: VA

How about putting it back in after you push it out? Is that a chore?

Im gonna drill a hole in the knockout and insert a grommet and reuse the knockout.