I was wondering wat year they changed the bolt patterns on the rims that came stock on the f250s? i was wanting to put a set on a wilson gooseneck and it has the old bolt pattern. What rims will fit it?

 

I'm pretty sure our bolt pattern is 8x6.5. They changed the bolt pattern to metric when they started the superduty's. Anything 8 lug older than 99 should fit.
I know dodge and chevy's also have the same bolt pattern 8 x 6.5 but I've heard some people saying the hole in the center of the rim will not clear for the fords.

 

X2 on what he said. the hole is too small on teh dodges and chveys.

 

which would them be? the 170mm or the 177mm

 

I have wanting a set for an enclosed trailer to match the truck......if it going on a 8x6.5 any Ford pre 99 truck wheel(vans still have the 8x6.5 after 99)...GM,Dodge and Hummer still have the 8x6.5(not exactly sure with Dodge though).You will have to check backspacing too...I have run into that problem with Jeep wheels on my car hauler.You should not be concerned with hole for the hub going on the GN.