'06 Expy blower problem
Thread Starter
|
Freshman User
Joined: Jan 2001
Posts: 37
Likes: 0
From: Murphy, TX
'06 Expy blower problem
So the front blower in my EB w/ DATC decided to start misbehaving today. It appears to be blowing full speed, regardless of fiddling with the fan speed button. You can hear the blend doors operating and air appears to be coming out of the ducts as expected, just at full blast. I've checked the obvious fuses and relays in the fuse box in the passenger footwell, nothing amiss there. So far it doesn't stay on when the key is off, which is nice. 
Anybody have any suggestions? Was supposed to hit the road later this week... As much as I'd enjoy conversation being drowned out by the blower, I can imagine my wife and parents might not appreciate it so much.
Thx!
Anybody have any suggestions? Was supposed to hit the road later this week... As much as I'd enjoy conversation being drowned out by the blower, I can imagine my wife and parents might not appreciate it so much.
Thx!
Elder User
Joined: Jun 2006
Posts: 980
Likes: 0
From: Lunenburg, MA
more than likely the blower speed controller, as the eatc's don't have a resistor. there are twoi choices depending on build date. if you give me the last 8 digits of your vin, i can get you the right p/n.
Thread Starter
|
Freshman User
Joined: Jan 2001
Posts: 37
Likes: 0
From: Murphy, TX
Thanks, you have email. Ran across another thread with similar problem description and that did the trick in that case.
BTW, where's Lunenburg? My handle comes from when I lived in Wilmington for a bit.
BTW, where's Lunenburg? My handle comes from when I lived in Wilmington for a bit.
Thread Starter
|
Freshman User
Joined: Jan 2001
Posts: 37
Likes: 0
From: Murphy, TX
Thanks! When I headed off to the dealership, I noticed the blower was working properly again. Go figure... I picked one up anyway but haven't swapped them out yet. Wife made me take her Edge once she heard the Expy was "broken".
Happy holidays!
Happy holidays!
