Desktop Dyno Please Help
Thread Starter
|
New User
Joined: Nov 2008
Posts: 9
Likes: 0
Desktop Dyno Please Help
I have a 1968 Ford 390 and I was wondering if someone could punch this info up on desktop dyno or give me a ballpark figure on how much Horsepower it has. It has a set of C8ae-h heads that have been shaved .030 with 2.08 intake valves and 1.66 exhast valves and it has been port and polished, and the following done to the engine
Bored .030 over
Edelbrock Performer intake
Hooker headers
Accel HEI high performerence coil
Roller Rollers
650 cfm Dual line Holley Carb
Big lift Crane cam( can't remember exact lift)
Thanks
-Dusty
Bored .030 over
Edelbrock Performer intake
Hooker headers
Accel HEI high performerence coil
Roller Rollers
650 cfm Dual line Holley Carb
Big lift Crane cam( can't remember exact lift)
Thanks
-Dusty
I can't help but I'd suggest you repost your question over at the FE forum. There are lots of FE gurus there that would be glad to help.
