Hello From Ga.
Thread Starter
|
New User
Joined: Mar 2007
Posts: 2
Likes: 0
Hello From Ga.
Hello everyone my name is Andre and I Have a 78 F100 2wd, 408w. I am currently stationed Ft Stewart (in Iraq as of now). Before I deployed I builf my first engine which was a 408w that consisted of performer rpm heads, rpm air gap intake, an of the shelf hyd roller cam and a 650 speed demon. I have to tell you i was very happy with the end result.
Since I been deployed I have been doing alot of reading on other forums and hooked up with a guy name Jay Allen. I have since changed the whole top end which now consist of a custome grind hyd roller cam, Trickflow TW 205cc heads, vic jr intake, and I will be getting a carb from Prosystem. I Look forward to learning from the members of this board and applying them to my build.
Since I been deployed I have been doing alot of reading on other forums and hooked up with a guy name Jay Allen. I have since changed the whole top end which now consist of a custome grind hyd roller cam, Trickflow TW 205cc heads, vic jr intake, and I will be getting a carb from Prosystem. I Look forward to learning from the members of this board and applying them to my build.
FTE Leadership Emeritus
Joined: Aug 2006
Posts: 47,280
Likes: 172
From: DELAWARE, The First State
Hi Adnre, welcome to FTE!
First thank you for serving our country and keeping us safe back home.
Very cool project you have going. The info and members here should be able to assist you with your questions.
Did you know that FTE has a local chapter for GA members? You can visit and join your local chapter here,,, https://www.ford-trucks.com/forums/forum82/
Glad to have you as a member, enjoy the site.
First thank you for serving our country and keeping us safe back home.
Very cool project you have going. The info and members here should be able to assist you with your questions.
Did you know that FTE has a local chapter for GA members? You can visit and join your local chapter here,,, https://www.ford-trucks.com/forums/forum82/
Glad to have you as a member, enjoy the site.
Thread
Thread Starter
Forum
Replies
Last Post
