Billet dash complete (almost)

Reply Subscribe

Thread Tools

Search this Thread

Nov 5, 2008 | 06:07 PM

jaye

Thread Starter

Posting Guru

Joined: Aug 2000

Posts: 1,849

Likes: 0

From: S.C.

Billet dash complete (almost)

I almost completed the installation of my dash I've gone through two sets of indicator/high beam light and they still don't work, they blink a few times then quit. I use a probe light and current is still goin through the wire, I tried some 1/4" LED lights I got from PepBoys however, they are far to bright. I also installed some billet *****. I still have to tighten the screws in the back of the panel.

Nov 5, 2008 | 07:08 PM

56efffie

Elder User

Joined: Sep 2002

Posts: 503

Likes: 0

From: Edgewood, NM

Lookin good Jaye! I like the two tone dash with the stripe too!!

Nov 5, 2008 | 07:09 PM

Stephen67

Cargo Master

Joined: Aug 2008

Posts: 2,661

Likes: 23

Beautiful!

Nice choice with the red pinstrip btw, really gives it a high end look.

Nov 5, 2008 | 07:28 PM

Old F1

Cargo Master

Joined: Feb 2008

Posts: 2,795

Likes: 129

From: Windermere Valley,B.C. Ca

Quote:

Originally Posted by jaye

I've gone through two sets of indicator/high beam light and they still don't work, they blink a few times then quit.

Hum, some LED’s and small lamps do not have enough resistance to make a standard flasher work, have you tried a electronic flasher, as it doesn’t care?

“But being wrong keeps me humble”