Black Hawk down
Thread Starter
|
Senior User
Joined: Nov 2007
Posts: 494
Likes: 1
From: Guelph
Black Hawk down
I have a 1 1/2 ton black hawk floor jack that I have had for 20 years. The valve at the bottom of the handle has broken off a few times and I have been able to weld it back together. Its now time to replace it. Any ideas if there are parts still available for these jacks. The new ones are not close in quality as these old ones.
Post Fiend
Joined: May 2008
Posts: 7,641
Likes: 21
From: Poway, Ca.
Hi Reg1952!
Dave Boley is probably one guy to ask about this. But, I think he's in the middle of the drive back from his sons in Atlanta to Home in Ohio.
You might want to send him a PM so when he finally gets back "up" he can help you!
J!
Dave Boley is probably one guy to ask about this. But, I think he's in the middle of the drive back from his sons in Atlanta to Home in Ohio.
You might want to send him a PM so when he finally gets back "up" he can help you!
J!
