Generic sway bar question
Thread Starter
|
Mountain Pass
Joined: Jun 2002
Posts: 230
Likes: 0
From: SW Maryland
Generic sway bar question
My bushings on the rear sway bar are shot on both sides. I want to remove the rear sway bar & sway bar links to work on them. Can this be done safley with the truck on the ground, or does it need to be lifted up by the frame?
Also, are rear sway bars axle-dependent? Would it fit with a 10.25 axle and matching leafs?
Sorry if this has been asked before, search is still broken...
83 F250, D60 Lslip semifloat 3.5
Also, are rear sway bars axle-dependent? Would it fit with a 10.25 axle and matching leafs?
Sorry if this has been asked before, search is still broken...
83 F250, D60 Lslip semifloat 3.5
Posting Guru
Joined: Dec 1999
Posts: 1,903
Likes: 1
From: Copley, OH
Generic sway bar question
Installing a sway bar can and SHOULD be done on the ground with the suspension at its normal height. More likely to work when installed. On a re-install, bracket locations are already determined so it's not as critical. You won't need jackstands, but they do provide a lot more working room.
Thread
Thread Starter
Forum
Replies
Last Post
Sparky83
Brakes, Steering, Suspension, Tires, & Wheels
1
Jun 13, 2016 08:25 PM
smoky_diesel
6.7L Power Stroke Diesel
3
Jun 7, 2016 12:55 PM
atillett
Explorer, Sport Trac, Mountaineer & Aviator
5
Mar 14, 2008 07:56 AM
