08 tailights
Thread Starter
|
Senior User
Joined: Dec 2006
Posts: 250
Likes: 0
From: 80 Miles N of El Paso TX
08 tailights
Hi,
I was filling my 02 Stroker up at the truck stop the other day, & a 08 pulled upn at the pump next to me. A brainstorm hit, but I don't kinow if it will work, or if any body posted this before me as I have not been online in a while. I apologize if it's been done. To make a long story short, I am curious if a set of 08 taillight will fit in an 02? are they mounted the same way? Or is a little custom work needed? I just want to make my truck look a little different.
I was filling my 02 Stroker up at the truck stop the other day, & a 08 pulled upn at the pump next to me. A brainstorm hit, but I don't kinow if it will work, or if any body posted this before me as I have not been online in a while. I apologize if it's been done. To make a long story short, I am curious if a set of 08 taillight will fit in an 02? are they mounted the same way? Or is a little custom work needed? I just want to make my truck look a little different.
Thread Starter
|
Senior User
Joined: Dec 2006
Posts: 250
Likes: 0
From: 80 Miles N of El Paso TX
Senior User
Joined: Apr 2007
Posts: 166
Likes: 0
Trending Topics
Elder User
Joined: Feb 2008
Posts: 544
Likes: 0
From: El Paso, Texas
This is my 99. I cut the bucket off of the drivers side of my old tailgate and welded it on the new one. It seemed the quickest way to me at the time. I wish I would have bought the other hinge mount though.
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
Top 10 Most Expensive Ford Trucks Ever Sold on Bring a Trailer
Joe Kucinski
2027 Ford Super Duty Buyer's Guide (Every Model, Engine, & Package)
Brett Foote
Top 10 Ford Truck Tragedies
Joe Kucinski
AEV FXL Super Duty - the Super Duty Raptor Ford Doesn't Make
Brett Foote
Lobo Vs Lobo: Proof the F-150 Lobo Should Be Even Lower!
Michael S. Palmer
Ford's 2001 Explorer Sportsman Concept Looks For a New Home
Verdad Gallardo
10 Best Ford Truck Engines We Miss the Most!
Joe Kucinski
2026 Shelby F-150 Off-Road: Better Than a Raptor R?
Brett Foote
2027 Super Duty Carhartt Package First Look: 12 Things You NEED to Know!
Michael S. Palmer
Elder User
Joined: Feb 2008
Posts: 544
Likes: 0
From: El Paso, Texas
The only reason I could afford it is because an idiot ran into the back of me. I came out ahead because I put a few hundred in my pocket and got a new tailgate and bumper.
Edit: Here is a link to the swap https://www.ford-trucks.com/forums/6...=2008+tailgate
Edit: Here is a link to the swap https://www.ford-trucks.com/forums/6...=2008+tailgate
Last edited by zack7.3; Oct 11, 2008 at 11:09 PM.
Laughing Gas
Joined: Dec 2004
Posts: 999
Likes: 6
i have done both and it is easy
i have the 08 tail gate on my 99 and looks great and functions great
the 08 gate has a torsion bar in it that makes the gate easy to lower and raise, you can do it one handed. fits perfect and all you need is the driver side bed hinge along with the 08 tail gate. the torsion bar locks into the passenger side hinge but everything bolts up fine, the hinge part was $12 at ford
the tail lights fit perfect as well, they stick out a little but that is the design as it looks similar on the 08 trucks. it allows you to see the light in our rear view mirror to make sure the lights are working, and you can do it splicing only a few wires
the 08 gate has a torsion bar in it that makes the gate easy to lower and raise, you can do it one handed. fits perfect and all you need is the driver side bed hinge along with the 08 tail gate. the torsion bar locks into the passenger side hinge but everything bolts up fine, the hinge part was $12 at ford
the tail lights fit perfect as well, they stick out a little but that is the design as it looks similar on the 08 trucks. it allows you to see the light in our rear view mirror to make sure the lights are working, and you can do it splicing only a few wires
