Hydrolic assisted steering
Thread Starter
|
Elder User
Joined: Sep 2000
Posts: 936
Likes: 0
From: Bay area
Hydrolic assisted steering
I have been reading on this. I am very comfident I can drill and tap my own steering box for the pressure and return lines. I just need to know where to put these on my steering box.
has anyone done anything like this at home?
if so how did you know where to drill?
is there some place I can find blown up pictures of the internals of my ps gear box.
this is in a 78 bronco.
has anyone done anything like this at home?
if so how did you know where to drill?
is there some place I can find blown up pictures of the internals of my ps gear box.
this is in a 78 bronco.
Senior User
Joined: Jun 2000
Posts: 175
Likes: 0
From: Mesa, AZ
Hydrolic assisted steering
Don't know about the questions your asking, but if you want the low buck approach, get ahold of Matt... www.westtexasoffroad.com is his website... his steering setups are working excelent for quite a few people I know, & VERY reasonalbly priced... something to look into anyway.
Thread Starter
|
Elder User
Joined: Sep 2000
Posts: 936
Likes: 0
From: Bay area
Hydrolic assisted steering
I have emailed him and talked to him.
but If I can drill the box and tap it myself, I would only be buying the hydrolics for the ram and all.
I think if I could do the box myself, I could have hydrolic steering for less than $150.
but If I can drill the box and tap it myself, I would only be buying the hydrolics for the ram and all.
I think if I could do the box myself, I could have hydrolic steering for less than $150.
Thread
Thread Starter
Forum
Replies
Last Post
brbuchanan
1973 - 1979 F-100 & Larger F-Series Trucks
3
Jun 5, 2016 05:06 PM
Ecartman
1967 - 1972 F-100 & Larger F-Series Trucks
17
Jan 27, 2003 09:42 AM
