Bronco Wont Start
Posting Guru
Joined: Aug 2000
Posts: 1,984
Likes: 2
Bronco Wont Start
Wise, did you replace ignition module box on fenderwell? These tend to go bad frequently on Fords. Also could be ignition switch. Try connecting a jumper wire from batt pos. to coil pos. and see if it starts. If it does, look at it being switch or switch circuit. If it dosen't, look at module. Good luck. Don
"Nothing lasts forever except natural stone and old Ford trucks." (Willie Nelson)
"Nothing lasts forever except natural stone and old Ford trucks." (Willie Nelson)
Freshman User
Joined: Feb 2001
Posts: 29
Likes: 0
Bronco Wont Start
Hi, had an 85 Ford Bronco with an 302 EFI I van rember where it was but there is a medium sized plug that I think is right on top of the motor in the front, if it becomes unplugged for some reason the engine will not fire and the engine will not start, this may be worth checking out to see if you have all your wires plugged in on top of the motor, the plug on mine was worn and I had to wire it together to make connection, hope this helps
