Looking for ideas please.
Thread Starter
|
Junior User
Joined: Sep 2007
Posts: 57
Likes: 0
Looking for ideas please.
I'm looking to put my 93 bronco on a 92 f-250 reg. cab long box chassis. Has anyone done this b4? The reason why i wanna do this is my frame has been tweeked in an accident with the previous owner and has angles welded to it to stiffen it up or something I dunno. But im tired of high fuel with my 9.95mpg 351w and want to put a cummins in.
I know how to swap the motor in but would love ideas and tips on sectioning the frame (legally to pass an inspection) to fit my 93 bronco. thanks alot.
I know how to swap the motor in but would love ideas and tips on sectioning the frame (legally to pass an inspection) to fit my 93 bronco. thanks alot.
Posting Guru
Joined: Dec 2003
Posts: 1,205
Likes: 0
From: Ontario
I believe the frame needs to be boxed.
Also you need to find out if your frame can be welded on the 250 one I mean,
some of the new frames I believe are not weldable.
Let us know how it works out.
some of the new frames I believe are not weldable.
Let us know how it works out.
Thread Starter
|
Junior User
Joined: Sep 2007
Posts: 57
Likes: 0
Thank you for your info I will check this out
