When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
FYI. Blue Diamond Parts/Power Stroke Diesel is holding a few 6.0 training classes in the Philadelphia area. If you want to know what's inside your engine, how it works and it's feeding and care... they are free. Food is served starting at 5:30PM till about 6:15PM. The Navistar Engineer/Instructor starts class at about 6:30PM. Class runs about 3 hours or so depending on the amount of questions. The hosting dealers usually have door prizes at the conclusion. You must RSVP to the dealer you plan on attending by Sept.5
September 17, 2008.
C & C Ford Sales, Horsham, PA. RSVP to Mike in Parts. 215-672-1981 or mlauria@chapmanautogroup.com
(located on Rt. 611 about a mile or so north of the turnpike on the right)
September 18, 2008.
Chapman Ford Sales, Inc. 9371 Roosevelt Blvd. Philadelphia, PA 19114
RSVP to Ric in Parts, 800-598-4990 or ealburger@chapmanautogroup.com Obey lights and speed on Rt.1/Roosevelt Blvd. Both are camera enforced.
Thanks for the heads up! I'm going to be in Pittsburgh on the 17th. But thats still a hike from there. I would like to go just to get as much information as possible on the 6.0 Ah well..... you never know
Thanks for the heads up! I'm going to be in Pittsburgh on the 17th. But thats still a hike from there. I would like to go just to get as much information as possible on the 6.0 Ah well..... you never know
These training classes are geared to the installer/fleet market. If you are "mechanical", this class is for you. There's 36 guys like me out there and we all hold these classes at various dealers around the country. I'm trying to develop a way to post them to you guys & girls but I've got to get the info from my guys first. I posted a 6.4 class announcement under the 6.4 section but the moderator hasn't "cleared" it yet. I'm a newbee working towards 25 posts. The 6.4 class will be the evening of September 16 at Sunbury Motors, Sunbury, PA. (about an hour north of Harrisburg, PA) Times/food are the same. RSVP to Rick Troutman in parts.
These training classes are geared to the installer/fleet market. If you are "mechanical", this class is for you. There's 36 guys like me out there and we all hold these classes at various dealers around the country. I'm trying to develop a way to post them to you guys & girls but I've got to get the info from my guys first. I posted a 6.4 class announcement under the 6.4 section but the moderator hasn't "cleared" it yet. I'm a newbee working towards 25 posts. The 6.4 class will be the evening of September 16 at Sunbury Motors, Sunbury, PA. (about an hour north of Harrisburg, PA) Times/food are the same. RSVP to Rick Troutman in parts.
Hey Paulfreda,
Do you think you guys will be doing any 6.0 classes in the south-east area? Im down in TN (just outside of chattanooga) and I would love to attend one of these.
Is there an online schedule we can look at?
Here's one more training class in Florida...These are FREE!
Gary Yeomans Ford Daytona Beach, Florida. September 3 starting at 6:00 PM. Food will be served.
RSVP---Kevin Edwards (Wholesale Manager) 386-274-2886
YOU MUST RSVP.
This Hennessey Takes the Expedition Tremor's Off-Roading Capability to the Next Level
Slideshow: The VelociRaptor Expedition gains a lift, upgraded suspension, Brembo brakes, and trail-ready equipment while retaining the stock 440-horsepower EcoBoost V6.
Rezvani's Latest Post-Apocalyptic Monster Is a Ford F-150 Raptor Underneath
Slideshow: Called the Fortress, the 850-horsepower pickup combines Raptor underpinnings with military-inspired features, survival equipment, and a starting price of $285,000.