light problems after steering column change
Thread Starter
|
New User
Joined: Jun 2002
Posts: 16
Likes: 0
From: seattle king
light problems after steering column change
Hi, I just changed out my defective steering column in my '76 F250 for one that I was told is from a '75 F150. Now, the brake lights and turn signals won't work when the headlights or running lights are on. Is there a wiring difference between the two years, or is the multi-switch just dirty? The wires at the curved connector are the same color-code on both of the columns. Any help is greatly appreciated.
Gav
Gav
New User
Joined: Jan 2008
Posts: 0
Likes: 24
light problems after steering column change
Does your truck have cruise control?
I would say the signal switch in that replacement column is the problem.
[font color=red]Dennis
FTE Assistant Administrator
[/font]
[link:www.ford-trucks.com/guidelines.html|Club FTE]
[link: motorhaven.autoanything.com|How YOU Can Support This Site]
http://www.clubfte.com/users/mil1ion/canada_flag_animated.gif
[link:www.clubfte.com/users/mil1ion/Mil1ion.html|My Website,"North Of The 49th"]
I would say the signal switch in that replacement column is the problem.
[font color=red]Dennis
FTE Assistant Administrator
[/font]
[link:www.ford-trucks.com/guidelines.html|Club FTE]
[link: motorhaven.autoanything.com|How YOU Can Support This Site]
http://www.clubfte.com/users/mil1ion/canada_flag_animated.gif
[link:www.clubfte.com/users/mil1ion/Mil1ion.html|My Website,"North Of The 49th"]
