Engine Not Running?
Thread Starter
|
Junior User
Joined: Dec 2003
Posts: 90
Likes: 0
Engine Not Running?
While hooking up a scanner to my 96' F-150 with the engine running. The scanner is saying that the engine isn't running but, we are getting reading from all the other sensors. Could this be related to the code P1351 IDM Circuit Input Fault. We are trying to figure out the problem. I've already change ECM, C Module, EGR Sensor.
Thread Starter
|
Junior User
Joined: Dec 2003
Posts: 90
Likes: 0
Scroll down where. I figured out why the scanner wasn't seeing the engine running. I still have the issue of a code P1351, that i need help on. I just need what needs to changed are looked at in order get that stupid engine light to go away.
Thanks,
R.Lay
Thanks,
R.Lay
Post Fiend
Joined: Jan 2005
Posts: 8,402
Likes: 10
Apologies. I did not notice that you had posted the other thread and had already got a reply from Conanski. I think the module he is talking about is the ign. module. I think you should find it either on an inner fender or on the distributor. If you go to fordfuelinjection.com you should find it there.
