Factory Expedition Subwoofer installation

Reply Subscribe

Thread Tools

Search this Thread

Jan 27, 2001 | 04:23 PM

qiksnk

Thread Starter

New User

Joined: Jan 2001

Posts: 2

Likes: 0

Factory Expedition Subwoofer installation

I have mounted and plugged in, but I'm not getting anything. I checked for 12VDC at plug, but hardly nithing from the 3 pin plug to front of amp....any help woud be great, thanks in advance
Tim

Jan 28, 2001 | 11:29 AM

mudinford

Elder User

Joined: Jan 2000

Posts: 661

Likes: 1

From: Villa Ridge, MO

Factory Expedition Subwoofer installation

[font size="1" color="#FF0000"]LAST EDITED ON 28-Jan-01 AT 12:30 PM (EST)[/font][p]Your question is a little vauge...there is really a few reasons that you wouldnt get any power to the sub. Not a good ground, not a good 12V+. What you need to do is get a good test light and start tracing the wire back to the head unit or where ever it starts and work up from there. If you do that i am sure you will find your problem. Also, make sure that Ford didnt use a fuse for that amp for the sub. If you are adding in the amp/sub, i am sure they didnt include the fuse for that. Check a wire diagram to see if it ran through the fuse box. Hoped i got you pointed in the right direction.

Dan "Mudinford" MacDonald