Rotor question
Thread Starter
|
Posting Guru
Joined: Apr 2004
Posts: 1,388
Likes: 1
Rotor question
Dumb question........ I replaced 2 front rotors about 6 months ago. A caliper just hang up on me and warped one out. Does it make more sense to junk the rotor and start over new again or is there a possibility to have a newly used warped rotor turned.......... Rather sound like a moron here than in person........
Sit. Stay.
Joined: Oct 2001
Posts: 18,308
Likes: 20
From: Washington State
I would see if it can be resurfaced. My local shop only charges $15 to resurface versus "lots more" for a new one.
"Turning" relates to drum brakes. "Resurfacing" is for disc brakes. ...just some useless trivia.
"Turning" relates to drum brakes. "Resurfacing" is for disc brakes. ...just some useless trivia.
Thread Starter
|
Posting Guru
Joined: Apr 2004
Posts: 1,388
Likes: 1
Thanks. I always say something slightly off in terminology. Luckily it was close enough to be understood.
Conga, thanks.... that's a good idea but the guys at the parts store I go to are pretty good so I really don't want to try to pull one over on them.
As long as it's somewhat possible I'll take them to a shop and see if they'll have success in resurfacing them.
thanks again
Conga, thanks.... that's a good idea but the guys at the parts store I go to are pretty good so I really don't want to try to pull one over on them.
As long as it's somewhat possible I'll take them to a shop and see if they'll have success in resurfacing them.
thanks again
