I need to sell or trade off my F-6 pug nosed truck. It is a good, solid, strait truck but is completely disassembled. It would be all original but I traded the flatty off a long time ago. If someone is interested I have a 300 Ford six with a NPT435 four speed I will sell with the truck but will price the truck both ways. The chasis is stock and has a working electric two speed with a 5:83 ring and pinion. There is some extra sheet metal left from a parts truck and lots of hard to find stuff plus the location of another parts truck I have been buying stuff off of. C O E's are pretty neat because there are not many people that build them. The asking price is $1500 w/6cyl. and 4 speed. Or $1200 w/o motor and trans. If you make a reasonable offer be prepared to own this truck. Serious buyers only, NO TIRE KICKERS, Tom @ 405-603-8875.

 

Wanted!!!

Good to have found this site!

I own a 1974 Ford B-700, Bluebird Bus. What’s cool about this one is that it is one of the few remaining 4 wheel drive units that were made for the construction of the Alaska Pipeline.

I’ve converted it to a motor home, and gone thru the entire Rockwell/ Marmon Herrington drive train. I’m putting a roller cam 429 in front of an Allison 545, 4 speed by February 2008, as soon as I finish my degree. I’ve got all the parts, the engine is in the machine shop being built.

The only thing, I am having a terrible time finding Medium Duty truck fenders. They have to be from 1973 to 1979, from any Ford truck bigger than a 1 ton, say F-450, 500, 550; all the way to dump truck and or buses.

I need some straight ones, and a little surface rust is okay because the whole 32 foot bus is going to be repainted. I'm going to post this in the classifieds also.

I need them shipped to Fairbanks, Alaska. I would like to talk or e-mail anyone that needs a digital pic of what they look like, I can send a couple to their e-mail or over this site. I still don’t know for sure how this site works. But here’s my phone number to discuss this over the phone if it is easier.
907-456-2482
e-mail
fskrt2@uaf.edu
Please leave a message, I will definitely return calls that leave a message concerning these fenders.

Thanks in advance for any help that can be offered and have a great day.

 

I two trucks I need to part out. the 81 body is all there and it even has a tube grill. It has seen much better days but I am willing to sell parts cheap.
The 79 is petty ruff it has the dana rear and all of the suspenion is there.
I need to get these trucks parted as soon as possible.
I am located in Blanchard. You can call me on my cell 405-274-6680 or email me at okiewelder@pldi.net.
Thanks, Steven

 

I have bed rails, grill guard and a bug deflector for a '79 long bed. I'd like to sell or trade them locally so that I don't have to ship them. You can see them on my truck in my photo gallery. They are not on the truck and are ready for pickup. You will have to sand and paint them for them to look good again. They are located near Crescent (north of OKC). I'd like to trade for a rear bench for the Supercab or 16.5 inch wagon wheels, but will take offers.

 

sorry, these havent got anything to do with a B-700 4X4 bus thats 32 feet long

 

There's a 1988 full size Bronco (Eddie Bauer edition) sitting about a mile east of Waterloo Road and I-35 north of Edmond. It needs some work. 144,000 miles with a lift and big tires. He's asking $2495, negotiable.

 

Here is a link of what i have 450 obo -------ford powerstroke------ 6.0&6.4 2003-2008

http://www.bullydogshop.com/product/...256.2096.0.0.0

 

Needed: leads to 65-66 ford trucks that are or might be for sale. Needs not to be running but needs to have a solid body.

 

i put the ol' girl up for sale, we will see if she sells.....


https://www.ford-trucks.com/classifi...t/20606/cat/17

 

I searched this thread but I did not find what I'm looking for.

I need one driver side 3 point retractable seat belt to replace the fraying one in my 78 F150 regular cab.

I also need one drivers side tail lense housing.

 

Need one for my garage. Does not need to be pretty, just mechanically sound and nothing wrong with the cooling part of it. Prefer frost free and $50 or less.

 

Its time to sell my 64 ford short bed, With the race car and needing to redo a bunch of things on my 72 It will be years befor I get to this project so befor it rusts up somebody needs to finish it. Check my gallery for pictures but I'm going to update them this weekend. I'm asking 1,500. more details e-mail me.

 

I have a pickup bed trailer (not the blue one in my gallery) that I bought at an auction a couple years ago. I don't want to mess with trying to get the axle and hubs fixed enough to pull it on the highway, plus the thing is too heavy anyway. The bed is in okay shape so if someone will help me take it off the frame, they can have it. IIRC the tailgate is on and works. It's the style that came before the 68-71. I'll try to take a pic or two but I'm in Wichita and it's about 30 miles away in Newton, and I haven't been up there much lately.

 

I've got all 5 books. Cover of Volumn A is torn, but all pages are good. Rest of the books are good. Covers Bronco, Econoline, F-150-F-350, F Series Super Duty. E-mail me fo pictures. Sold the F-150 and no longer need these. I'm asking $50.00.

 

I am interested in the books and did see the pics. i can be reached at jhintz81@comcast.net