overhead console
Thread Starter
|
New User
Joined: Jun 2008
Posts: 7
Likes: 0
overhead console
hi guys, got a small problem I have to take down my overhead console to fix my compass and mpg readout message center it was not working when i got the truck so i am going to fix it my self. but dont know how to get at it yet my overhead has a/c controles ***** on it I am not sure what to do first on this tear down if some one tell how me to get the console down and the message center out maybe i can find somebody fix it or maybe i can try just dont know what to do first help please !!!!
Mountain Pass
Joined: Feb 2005
Posts: 172
Likes: 7
From: McMinnville Oregon
Yes, one screw holds the overhead console
Yes, there is one screw under one of the two flip down doors (for the garage door opener, or the sunglass holder). It will pull down with a few quick tugs on the front and back. You might use a small bungee cord afterwards to
hold the console without placing too much tension on the wiring. There are just a few wiring connectors to unclip, and the console will drop down easily.
There are no push-pull cables like in the "old days" for the AC/heater controls. I've had to replace the "lie-o-meter" as they call it on my 2003.
Although mine is pretty accurate, so I didn't hesitate to get a replacement. Found it right here on this forum from one of the other members. There is a fix mentioned if you do a forum search, just didn't work for my issue.
Good luck.
George
hold the console without placing too much tension on the wiring. There are just a few wiring connectors to unclip, and the console will drop down easily.
There are no push-pull cables like in the "old days" for the AC/heater controls. I've had to replace the "lie-o-meter" as they call it on my 2003.
Although mine is pretty accurate, so I didn't hesitate to get a replacement. Found it right here on this forum from one of the other members. There is a fix mentioned if you do a forum search, just didn't work for my issue.
Good luck.
George
Sit. Stay.
Joined: Oct 2001
Posts: 18,308
Likes: 20
From: Washington State
No, one screw DOESN'T hold the console. The front has those push-fit clips, while the back has a piece of plastic that goes into a guide. Pull down the front and it slides forward a tad to come out of the guide. Unplug the connectors and "Bob's your Uncle". The thing only weighs about a pound (maybe). It will not put any undue stress on the wiring if you let it hang.
Okay...on edit... this is how it was on my 2000 and my current 05. Maybe they changed something in the middle years.
Okay...on edit... this is how it was on my 2000 and my current 05. Maybe they changed something in the middle years.
Posting Guru
Joined: Nov 2005
Posts: 1,519
Likes: 1
From: Wyandotte, Michigan
Trending Topics
Posting Guru
Joined: Nov 2005
Posts: 1,519
Likes: 1
From: Wyandotte, Michigan
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
10 Things Every Truck Owner NEEDS (2026 Edition)
Michael S. Palmer
Rezvani's Latest Post-Apocalyptic Monster Is a Ford F-150 Raptor Underneath
Verdad Gallardo
Top 10 Most Expensive Ford Trucks Ever Sold on Bring a Trailer
Joe Kucinski
2027 Ford Super Duty Buyer's Guide (Every Model, Engine, & Package)
Brett Foote
Top 10 Ford Truck Tragedies
Joe Kucinski
AEV FXL Super Duty - the Super Duty Raptor Ford Doesn't Make
Brett Foote
Lobo Vs Lobo: Proof the F-150 Lobo Should Be Even Lower!
Michael S. Palmer
Ford's 2001 Explorer Sportsman Concept Looks For a New Home
Verdad Gallardo
10 Best Ford Truck Engines We Miss the Most!
Joe Kucinski
Thread Starter
|
New User
Joined: Jun 2008
Posts: 7
Likes: 0
Hi guys thanks for all the help on the fix on my overhead what all do you take apart to get to chips you are talking about soldered. I also find I place on ebay where you can send your unit to him and he will repair it better than it was he will do it for 85 dolllars or so he says first i am going to try to fix my unit. thank for your help
Senior User
Joined: Mar 2004
Posts: 105
Likes: 0
I just did the fix to my overhead console computer last night...Radios Shack 15w soldering iron and some .015 silver solder..$15...soldered one 680 chip that was loose on one end and bang...works like a champ...thanks for all the help from this board.
1/8 mile Oval Track
Joined: Dec 2007
Posts: 1,300
Likes: 0
From: Newport,Tennessee
Do you have this guys name on Ebay? I tried doing mine,and I just gave up on it.
Hi guys thanks for all the help on the fix on my overhead what all do you take apart to get to chips you are talking about soldered. I also find I place on ebay where you can send your unit to him and he will repair it better than it was he will do it for 85 dolllars or so he says first i am going to try to fix my unit. thank for your help
