Pulling the load!
Thread Starter
|
Elder User
Joined: Mar 2005
Posts: 532
Likes: 0
From: azle texas
Pulling the load!
A pipeline is going in just south of Fort Worth and the land owner wants to give me the timber. They are clearing a massive amount of oaks. I am going to be using two methods of transport. (one way is 50 miles)
1, My 7.3 w/a 32' trailer
2, A large flatbed-tractor trailer type.
This is alot of weight, should I be concerned with overheating the turbo?
What should I know with hauling this much weight?
I have hauled several trailers loads of wood but only with my regular 16' trailer.
And does anyone know of any carriers that supply flatbed trailer drops and haul them when full.
1, My 7.3 w/a 32' trailer
2, A large flatbed-tractor trailer type.
This is alot of weight, should I be concerned with overheating the turbo?
What should I know with hauling this much weight?
I have hauled several trailers loads of wood but only with my regular 16' trailer.
And does anyone know of any carriers that supply flatbed trailer drops and haul them when full.
Laughing Gas
Joined: Mar 2004
Posts: 789
Likes: 16
From: West Coast/L.A. Area
If you have an automatic, I'd be worried about the trans and not the turbo temp. If it's a long project I would be putting a huge trans cooler on it, and getting Trans temp gauge as a minimum. These guys know their stuff here and I'm sure there will be some other recommendations too.
Elder User
Joined: May 2007
Posts: 999
Likes: 0
Just another reason not to live in California-no offense.
Trending Topics
Senior User
Joined: Jan 2007
Posts: 260
Likes: 0
From: Whitewright, Tx
[quote=GEugeneS; Cutting down Oak Trees. Out here in CA it's a felony I think![/quote]
What are you guys doing, saving them for the wildfires?
What are you guys doing, saving them for the wildfires?
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
10 Things Every Truck Owner NEEDS (2026 Edition)
Michael S. Palmer
Rezvani's Latest Post-Apocalyptic Monster Is a Ford F-150 Raptor Underneath
Verdad Gallardo
Top 10 Most Expensive Ford Trucks Ever Sold on Bring a Trailer
Joe Kucinski
2027 Ford Super Duty Buyer's Guide (Every Model, Engine, & Package)
Brett Foote
Top 10 Ford Truck Tragedies
Joe Kucinski
AEV FXL Super Duty - the Super Duty Raptor Ford Doesn't Make
Brett Foote
Lobo Vs Lobo: Proof the F-150 Lobo Should Be Even Lower!
Michael S. Palmer
Ford's 2001 Explorer Sportsman Concept Looks For a New Home
Verdad Gallardo
10 Best Ford Truck Engines We Miss the Most!
Joe Kucinski
Senior User
Joined: Jan 2007
Posts: 260
Likes: 0
From: Whitewright, Tx
Dry oak is going to weigh about 50# a cubic foot. (1'X1'X1') so your cut firewood will bee the heaviest load due to the ability to stack it better.
I would keep the trailer load below 13-14k. That is the trailer and the load. This will allow for pulling the trailer out of the broken ground.
It is good that you waited till now to do this project, high 90* day will make that bar oil flow better.
If you are working with timber that has been pushed over be very careful of limb with preasure on them and watch for the snake. Pipelines have a way of finding snake where noone else has ever seen them.
Good Luck with your project.
Elder User
Joined: May 2007
Posts: 999
Likes: 0
Are you cutting this to be milled for lumber, long cut and taken somewhere to be processed for firewood, or cut into firewood and hauled?
Dry oak is going to weigh about 50# a cubic foot. (1'X1'X1') so your cut firewood will bee the heaviest load due to the ability to stack it better.
I would keep the trailer load below 13-14k. That is the trailer and the load. This will allow for pulling the trailer out of the broken ground.
It is good that you waited till now to do this project, high 90* day will make that bar oil flow better.
If you are working with timber that has been pushed over be very careful of limb with preasure on them and watch for the snake. Pipelines have a way of finding snake where noone else has ever seen them.
Good Luck with your project.
Dry oak is going to weigh about 50# a cubic foot. (1'X1'X1') so your cut firewood will bee the heaviest load due to the ability to stack it better.
I would keep the trailer load below 13-14k. That is the trailer and the load. This will allow for pulling the trailer out of the broken ground.
It is good that you waited till now to do this project, high 90* day will make that bar oil flow better.
If you are working with timber that has been pushed over be very careful of limb with preasure on them and watch for the snake. Pipelines have a way of finding snake where noone else has ever seen them.
Good Luck with your project.
Thread Starter
|
Elder User
Joined: Mar 2005
Posts: 532
Likes: 0
From: azle texas
The timber is going to be processed into firewood. I have been selling firewood for 8 years. When my son and I pull up at a job big enough to pull out 5 cords or more, the guy always seems to chuckle when I tell him "NO I DONT HAVE A CREW, It is my 14 year old son, 3 or 4 stihl sawz, me and my PSD.''
Senior User
Joined: Mar 2007
Posts: 262
Likes: 0
From: Idaho
Depends on how you drive it. Sounds like you're reasonable when you have a load on so you should be fine. Trying to push it up long grades in high gear is what gets the turbo. Doesn't take too much to install a gauge for peace of mind.
Posting Guru
Joined: Feb 2008
Posts: 1,526
Likes: 1
From: Grass Valley, CA
I must say i love california! you just have to be in the right part:
Look_at_this <- four hour drive and really fun to climb.
californiajeeper.com :: Fordyce Creek Trail < less than one hour, one of the best quadding/wheeling areas in the world if you ask me...
YES! in so cal! lol
It's a hard fight between the normal people in california that want to do some clearing, keeping our forests from being a tinderbox and the hippies that are scattered throughout. (aka the only californians you ever hear about. )
Actually, while camping this weekend, we had a lightning storm that started about a dozen fires! yikes.
Senior User
Joined: Aug 2004
Posts: 297
Likes: 0
From: Igo, Northern Calif
I don't know what kind of oak they have in texas,but green white oak weighs 6000lbs a cord green.I would get a trans and EGT gauge they are cheaper than a motor or trans.
secondarychoas yea the hole north state is on fire i have 10 fires burning around me right now.
secondarychoas yea the hole north state is on fire i have 10 fires burning around me right now.
