Obligatory Post....
Thread Starter
|
New User
Joined: May 2008
Posts: 12
Likes: 0
Obligatory Post....
I got a "message" that said I hadn't posted in two weeks and I need to "participate" so... I'm participatin'... still haven't got my stupid clutch slave to work right...** 250m 7.3... haven't used the truck for a year, so guess I'll just keep drivin' the ole 84.. it goes... maybe the 88 will get "healed".. rg I participated.. thanks all...rg
Thread Starter
|
New User
Joined: May 2008
Posts: 12
Likes: 0
I can't suppress the spring in the slave and get it into position at the same time... my "New" slave didn't come with a "plunger" retainer like I see in some pictures... I dumped all of the fluid out and goit it on once, but after about 50,000 pumps to bleed it, it would just barely move the clutch fork, not enough to engage tranny... (I just put a new clutch/pressure plate in) before I replaced the clutch it was close to the floor to engage... I just quit on it for a while... hope you got a good idea for me... thanks rg
