help please!
Thread Starter
|
Senior User
Joined: Jan 2008
Posts: 166
Likes: 0
help please!
Hi i just recently bought a pair of motor mounts for my 400m to put in my 68 f100 2wd ..im not so good with automobiles so not all of this makes sense to me...my question is how to i get it to fit correctly? Do i need new frame mounts so i can put my 400 motor mounts on? i currently have hte 360 orginal mounts on it
Ford Parts Specialist
Joined: Nov 2006
Posts: 88,826
Likes: 785
From: Simi Valley, CA
302/351M/400 2WD engine perches (aka stands or brackets)
1977/79 F100/350 2WD 351M/400's and 1969/79 F100; 1975/79 F150's with 302's use the same engine perches.
D7TZ-6028-B (replaces D0TZ-6028-A) Right Perch **
D7TZ-6029-B (replaces D0TZ-6029-A) Left Perch **
These parts are obsolete, no Ford obsolete parts seller or Ford dealer has any: Junkyard only
** Perches aka engine stands, engine mount brackets. These are the steel parts that bolt to the crossmember. The rubber mounts bolt to these, then to the engine.
D7TZ-6028-B (replaces D0TZ-6028-A) Right Perch **
D7TZ-6029-B (replaces D0TZ-6029-A) Left Perch **
These parts are obsolete, no Ford obsolete parts seller or Ford dealer has any: Junkyard only
** Perches aka engine stands, engine mount brackets. These are the steel parts that bolt to the crossmember. The rubber mounts bolt to these, then to the engine.
Thread
Thread Starter
Forum
Replies
Last Post
Khauler
1973 - 1979 F-100 & Larger F-Series Trucks
12
Dec 31, 2011 02:54 PM
buttnuttn8
335 Series- 5.8/351M, 6.6/400, 351 Cleveland
4
Apr 16, 2002 09:46 AM
