Archived NorCal Buy/Sell/Trade Ads
#16
Join Date: Sep 2007
Location: Los Banos, California
Posts: 1,433
Likes: 0
Received 6 Likes
on
4 Posts
thinning out my truck parts
Howdy,
I just thought i would throw this out there, I need to thin out my ford truck parts, to much stuff to list (it also might be to much stuff to move).
my wife & I own 1/4 intrest in a 30 acre undivided intrest farm, 2 sisters want to sell it - need i say anymore. I have a lot of stuff and would be interested in making a deal on a bulk lot of parts, however i want to retain most of the 67 to 72 truck stuff, and some other things aswell. i "dont want" to scrap all these parts i put to much effort into getting them, i would rather sell it at a reasonable bulk price than to do that. also a few trucks need to be thinned out also, if you want to come take a look feel free to call or PM me about it (209)769-4058
Los Banos, thanks, Jess
I just thought i would throw this out there, I need to thin out my ford truck parts, to much stuff to list (it also might be to much stuff to move).
my wife & I own 1/4 intrest in a 30 acre undivided intrest farm, 2 sisters want to sell it - need i say anymore. I have a lot of stuff and would be interested in making a deal on a bulk lot of parts, however i want to retain most of the 67 to 72 truck stuff, and some other things aswell. i "dont want" to scrap all these parts i put to much effort into getting them, i would rather sell it at a reasonable bulk price than to do that. also a few trucks need to be thinned out also, if you want to come take a look feel free to call or PM me about it (209)769-4058
Los Banos, thanks, Jess
Last edited by mrcman58; 10-13-2007 at 02:39 PM.
#17
That sounds like an opportunity not to miss. Unfortunately, I don't have room for the stuff I already have. I even pay storage fees for one of my trucks. Surely someone cruising this forum has an interest in checking out what you have.
#18
Ranger parts feeler
I am in the process, still, of stripping down an '88 Ranger 2x to build a trailer.
Is anyone interested in the fender supports, cab, or cab panels, front suspension and any other misc parts off the thing?
I do have what I think is a 2.3 fuel injected intake, upper and lower, roller cam head and other misc parts sitting insied the cab. All glass is good, dash is stripped and trashed.
I have removed the fender supports already along with the majority of the wiring harnesses for the engine compartment.
I'm motovated to get rid of most of this to clean up the back yard so if someone wants the stuff it's up for grabs.
Thanks
Rich
Is anyone interested in the fender supports, cab, or cab panels, front suspension and any other misc parts off the thing?
I do have what I think is a 2.3 fuel injected intake, upper and lower, roller cam head and other misc parts sitting insied the cab. All glass is good, dash is stripped and trashed.
I have removed the fender supports already along with the majority of the wiring harnesses for the engine compartment.
I'm motovated to get rid of most of this to clean up the back yard so if someone wants the stuff it's up for grabs.
Thanks
Rich
#19
In need of a Motorcraft 2150 Carb. Just picked up a 73 F250 with a 390 2bbl, and it needs a carb. I had one for it, but I sold it to an FTEr in Los Angeles like 6 months back (D'oh!) I'm located in Santa Cruz. If you have an old working one around, let me know what you'd want for it. Thanks in advance!
#20
Join Date: May 2004
Location: The hills of No. Calif.
Posts: 12,169
Likes: 0
Received 5 Likes
on
4 Posts
For Sale: 1990 7.5/460 EFI engine complete with wiring harness. Too bad this didn't come my way when we were looking for a 460 for Thumper...!
It looks to be in good condition though it's been sitting a while and needs some cleanup. I'm told it runs well and has only about 85K on it, though I need to recheck and confirm that. I'll post pics after I get it cleaned up a bit. Has accessory brackets and some accessories, but no flywheel/flexplate. $750/negotiable
It looks to be in good condition though it's been sitting a while and needs some cleanup. I'm told it runs well and has only about 85K on it, though I need to recheck and confirm that. I'll post pics after I get it cleaned up a bit. Has accessory brackets and some accessories, but no flywheel/flexplate. $750/negotiable
#21
Join Date: Sep 2007
Location: Los Banos, California
Posts: 1,433
Likes: 0
Received 6 Likes
on
4 Posts
Howdy Everybody, check out post # 17 so far i have hauled out 21 tons of iron in my clean up process, as of now none have been truck parts (yet). i still would like to make a bulk deal on some of it. Jess
#22
Jess,
I sent you a PM.
Do you have the passenger side inner fender for '67-72 that is in fair condition? All the ones I find are rusted out under the battery.
Thanks,
Karl
I sent you a PM.
Do you have the passenger side inner fender for '67-72 that is in fair condition? All the ones I find are rusted out under the battery.
Thanks,
Karl
#24
'56 Steering Columns
I've got two automatic shifter steering columns from my '56 F100 project. I'd like to get $50 each for them. One even has an original steering wheel still attached. The steering wheel has a couple of cracks, but could be restored. Both shift sectors shown normal wear for a 52 year old truck. And if you're really strapped for cash, the price is negotiable.
#25
I've got a Holley 2 bbl 500 CFM with electronic choke on it. It has less than 3000 miles on it and is less than 9 months out of the box. I am pretty open to negotiate for it. Trade and/or money works. I am looking for a bench seat from a '67-'96 ford that is in good shape.
Thanks,
Karl
Thanks,
Karl
#26
I woukd like to buy both of your 56 columns
Originally Posted by Campbell 56
I've got two automatic shifter steering columns from my '56 F100 project. I'd like to get $50 each for them. One even has an original steering wheel still attached. The steering wheel has a couple of cracks, but could be restored. Both shift sectors shown normal wear for a 52 year old truck. And if you're really strapped for cash, the price is negotiable.
#27
#30
4bbl carb and intake
hey guys i'm looking to put a 4bbl carb and intake on my 5.0 H.O. which is a 302.
any way i was wondering if anybody had any of this stuff for sale use at a good price please drop me a pm or e-mail me at bigearl1369@comcast.net
thanks Earl W.
bigearl1369
any way i was wondering if anybody had any of this stuff for sale use at a good price please drop me a pm or e-mail me at bigearl1369@comcast.net
thanks Earl W.
bigearl1369