power valve / charging problems
Thread Starter
|
Freshman User
Joined: Mar 2008
Posts: 48
Likes: 0
From: Mentone Alabama
power valve / charging problems
put a new powervalve in my 1460- problem solved runs great
last week my battery went dead again for the last month i stole a small batt out of my broke cavalier would using a small battery kill it? I bought a proper size battery this weekend and im getting 13.81 running 13.60 with lights radio blower motor operating and after sitting all night the battery showed 12.21 o reily tested alt/ regulator showed good. can i sleep well at night now?
last week my battery went dead again for the last month i stole a small batt out of my broke cavalier would using a small battery kill it? I bought a proper size battery this weekend and im getting 13.81 running 13.60 with lights radio blower motor operating and after sitting all night the battery showed 12.21 o reily tested alt/ regulator showed good. can i sleep well at night now?
Thread Starter
|
Freshman User
Joined: Mar 2008
Posts: 48
Likes: 0
From: Mentone Alabama
i dont have a test light but with a multimeter how would i test this ? black lead to bat. ground post, pos. to disconnected ground with multimeter set to 12v.
i remember seeing this diagram last week when i was using the search function btw the battery showed 12.14 today i have not started it since i let it sit over night and posted the numbes above like this time yesterday it showed 12.21 ive had the door open a bit so the dome light may have been on for 30 min or so in the last 2 days
i remember seeing this diagram last week when i was using the search function btw the battery showed 12.14 today i have not started it since i let it sit over night and posted the numbes above like this time yesterday it showed 12.21 ive had the door open a bit so the dome light may have been on for 30 min or so in the last 2 days
