Archived LA Buy/Sell/Trade ADs
#31
not really 100% ford related, but could go in one of those kit bashed chevy power-planted ford body builds.
AFR 210cc competition racing heads. small block chevy, 210cc intake runners, 100% cnc matched, 80cc exhaust ports, angle plug, 62cc combustion chambers, 2.08 intake / 1.60 exhaust valves..... asking $1250 or best offer!
i have a NP208 transfer out of an 82 (i think) bronco, complete with adapter to a 4speed trans. i have pics if any one is interested. i'm asking $100 come and get it out of my way.
set of 3.73 gears out of ford super duty. 8K original miles on them dana 50 front, 10.5 rear. $150 for both sets, obo!
AFR 210cc competition racing heads. small block chevy, 210cc intake runners, 100% cnc matched, 80cc exhaust ports, angle plug, 62cc combustion chambers, 2.08 intake / 1.60 exhaust valves..... asking $1250 or best offer!
i have a NP208 transfer out of an 82 (i think) bronco, complete with adapter to a 4speed trans. i have pics if any one is interested. i'm asking $100 come and get it out of my way.
set of 3.73 gears out of ford super duty. 8K original miles on them dana 50 front, 10.5 rear. $150 for both sets, obo!
#32
after i do the powerstroke conversion tomy 92 dually, the 97 f250 in my sig will be up for sale or trade as well as the 7.3IDI engine. of corse, everything powerstroke will be removed, but all the not needed IDI stuff will be included except tranny(auto). Iam trying not to part this truck out, hoping some one has a wrecked 250 or wants to upgrade to a ext cab. but if it goes to long i will consider parting out. i will sell the IDI engine seperatly,but i would like to keep the body intact. just to answer a fw questions befor they are asked... i will be keeping the toolboxes, stacks and my chrome front grill and healights that are in the pics. all of the front end trim i am keeping will be replaced with what is on the 92. look in "my garage" for more pics. and i have a thread in idi section that will give you a little insight on the engine.
https://www.ford-trucks.com/forums/9...out-there.html i will be moving back to metairie,LA this week
https://www.ford-trucks.com/forums/9...out-there.html i will be moving back to metairie,LA this week
#38
cc stainless nerf bars $75. Under cover hard cover for lwb $250. Billet insert grill for 99 to 04 $25.
SCT loaded with Erics extreme race for a 04 $325. The sct is unlocked.
SCT loaded with Erics extreme race for a 04 $325. The sct is unlocked.
#42
i have been kicking this around more and more, and i guess i need to pull the trigger. i've had my F250 lifted for about 7 years now, and i've loved every minute, but i guess i need to drop things back down to reality (pun intended) and get some more use out of it. it's only logged 78K in it's life time, and instead of going in debt with another new truck, i might as well use the one i have!
well here is part one of two.
- 39.5 x 13.5 x 16 Super swamper IROK radials (directional tread)
- mounted on ProComp 1079's w/ 8 on 170mm bolt pattern (99+ super duty bolt pattern), 4.5 back spacing.
i payed $23-2400 brand new (package deal), and they may have 8K total on them, they need some polishing that's about it. tread is great, ride great, just looking to go smaller and lower.
** i'm asking $1800 OBO ** if you're local (in the state of La) i'll work with you on delivery / meeting point!!
pics
http://www.team-mudd-racing.com/clas...211_090020.jpg
http://www.team-mudd-racing.com/clas...211_090032.jpg
http://www.team-mudd-racing.com/clas...211_090040.jpg
http://www.team-mudd-racing.com/clas...211_090108.jpg
http://www.team-mudd-racing.com/clas...211_085938.jpg
http://www.team-mudd-racing.com/clas...211_085956.jpg
i'll also be listing the 9.5" lift as well. a quick over view of the lift
- 9" heavy duty front springs (9 springs, no "add-a-leafs" or "mini-spring packs")
- 6.5" rear springs with 3" blocks (7 springs and 1 small plate, no "add-a-leafs" or "mini-spring packs")
- Rancho 5000 shocks (need new boots)
- includes u-bolts.
*** not sure on price yet, might take some offers***
http://www.team-mudd-raci...MG_20110212_123108.jpg
http://www.team-mudd-raci...MG_20110212_123143.jpg
http://www.team-mudd-raci...MG_20110212_123533.jpg
http://www.team-mudd-raci...MG_20110212_123506.jpg
PM me, Email me if you want more info/pics!! Jason@team-mudd-racing.com OR teammuddracing@gmail.com
well here is part one of two.
- 39.5 x 13.5 x 16 Super swamper IROK radials (directional tread)
- mounted on ProComp 1079's w/ 8 on 170mm bolt pattern (99+ super duty bolt pattern), 4.5 back spacing.
i payed $23-2400 brand new (package deal), and they may have 8K total on them, they need some polishing that's about it. tread is great, ride great, just looking to go smaller and lower.
** i'm asking $1800 OBO ** if you're local (in the state of La) i'll work with you on delivery / meeting point!!
pics
http://www.team-mudd-racing.com/clas...211_090020.jpg
http://www.team-mudd-racing.com/clas...211_090032.jpg
http://www.team-mudd-racing.com/clas...211_090040.jpg
http://www.team-mudd-racing.com/clas...211_090108.jpg
http://www.team-mudd-racing.com/clas...211_085938.jpg
http://www.team-mudd-racing.com/clas...211_085956.jpg
i'll also be listing the 9.5" lift as well. a quick over view of the lift
- 9" heavy duty front springs (9 springs, no "add-a-leafs" or "mini-spring packs")
- 6.5" rear springs with 3" blocks (7 springs and 1 small plate, no "add-a-leafs" or "mini-spring packs")
- Rancho 5000 shocks (need new boots)
- includes u-bolts.
*** not sure on price yet, might take some offers***
http://www.team-mudd-raci...MG_20110212_123108.jpg
http://www.team-mudd-raci...MG_20110212_123143.jpg
http://www.team-mudd-raci...MG_20110212_123533.jpg
http://www.team-mudd-raci...MG_20110212_123506.jpg
PM me, Email me if you want more info/pics!! Jason@team-mudd-racing.com OR teammuddracing@gmail.com
#43
Blue def
Hey fellow 2011 Super Duty Owners, I just came across a deal on 2.5 gal jugs of blue def exhaust fluid. if anyone needs some I'll take $12.00 per 2.5 gals with filler spout FOB Kentwood, Louisiana!! Call me at 985-514 0767 or PM
#44
Looking for 61 - 67 two door Ford Falcon.
Okay here is the deal, my son will be turning 16 in May and I am looking for a 2door 61 - 67 Ford Falcon. I had him with me at the last classic car & Truck meet up and a guy pulled in with a nice 64 2 door Falcon and he went nuts over that car. I do not want a basket case, but I don't mind have to do some work on it. So with that said can you please keep you eye's open for one.The ideal car would be a 1964 Ford Falcon Sprint Hardtop or a 1967 Ford Falcon Futura Sports Coupe.
Thanks
Thanks
#45
I had a 68 Falcon Futura Sport Coupe for 15 years. I sold it in 2000 & regretted it ever since. It is hard to find one thats not a rust bucket now.
I have a few items for sale for a 97 F150 /5.4. All are in good shape. I took them off & replaced them with aftermarket parts except the seat lift kit
Fan
Shroud
Throttle body
Rear seat lift kit 4 inch
Front corner lights
I have a few items for sale for a 97 F150 /5.4. All are in good shape. I took them off & replaced them with aftermarket parts except the seat lift kit
Fan
Shroud
Throttle body
Rear seat lift kit 4 inch
Front corner lights