dukey11
Thread Starter
|
New User
Joined: May 2008
Posts: 1
Likes: 0
dukey11
Been on and off all day. Best info site I've ever seen.
I've got a 239 ('48) with deuces, EE, finned heads, hooked to a 5 speed waiting for a home.
A blown (671) 302 ('69) in a 34 hi boy.
a 302 ('78) on stand with no rockers and 3/8s studs with 5/16 threads (look like they are pressed in). What do I use for rockers?
I've got a 239 ('48) with deuces, EE, finned heads, hooked to a 5 speed waiting for a home.
A blown (671) 302 ('69) in a 34 hi boy.
a 302 ('78) on stand with no rockers and 3/8s studs with 5/16 threads (look like they are pressed in). What do I use for rockers?
Post Fiend
Joined: Feb 2000
Posts: 11,496
Likes: 6
From: Kansas
Nice to have you here! 
Our tech forums are what you need. Click on the Forums tab at the upper left and scroll over the boards. This one should help you out with the 302: Small Block V8 (221, 260, 289, 5.0/302, 5.8/351W) - Ford Truck Enthusiasts Forums You also have a local resource with your state chapter: Florida Chapter - Ford Truck Enthusiasts Forums
Our tech forums are what you need. Click on the Forums tab at the upper left and scroll over the boards. This one should help you out with the 302: Small Block V8 (221, 260, 289, 5.0/302, 5.8/351W) - Ford Truck Enthusiasts Forums You also have a local resource with your state chapter: Florida Chapter - Ford Truck Enthusiasts Forums
Thread
Thread Starter
Forum
Replies
Last Post
