I have a Stock 292 and I'm putting a tri-power on it . I have the carb Model 94's on a WEIAND manifold. What jet sizes should I use? Kurt G. Y-blocks rule.

 

The one that I had with progressive linkage the stock jetting worked excellent. (Picture proof in my gallery) But…….I have been wrong before.

 

Start with the stock jetting. Then go look up 286merc's little article on how to set up tripower and holley carbs. There are a few differing opinions on what to do with the carbs, but I have had some success with Carl's advice.

After you read up on it and give it a try, keep us informed.

tripowered, himmelberg