FE MSD ignition Q's
FTE Leadership Emeritus
Joined: Jul 2002
Posts: 42,561
Likes: 423
From: Long Island USA
I used the MSD 6AL on my '74 highboy, using a '76 distributor (electronic).
I had an 11:1 390 in it, lopey cam, and too big a carb (750 holley).
The MSD made a big difference in cold-start, low-end torque, and throttle response.
With a completely (near) stock motor, I don't know what it would do, although cold starting can only get better with an FE
I had an 11:1 390 in it, lopey cam, and too big a carb (750 holley).
The MSD made a big difference in cold-start, low-end torque, and throttle response.
With a completely (near) stock motor, I don't know what it would do, although cold starting can only get better with an FE
