need help
Thread Starter
|
Tuned
Joined: Dec 2005
Posts: 348
Likes: 3
need help
ok so i drove the truck through soom deep water came up over the hood for a second and stalled it out. after that i climbed out and made sure the intake was above the water level started it back up and drove out. now its making a really annoying ticking noise from the drivers side. i drained the oil and changed it there was no water in it. checked all the fluids no water in them. no check engine light all the gauges reading normal. everything seems normal except for this ticking noise and if i floor it it will only rev to about 3500 while driving. truck is a 2006 with the 5.4 triton
Moderator
Joined: Aug 2005
Posts: 164,377
Likes: 82
From: MA
ok so i drove the truck through soom deep water came up over the hood for a second and stalled it out. after that i climbed out and made sure the intake was above the water level started it back up and drove out. now its making a really annoying ticking noise from the drivers side. i drained the oil and changed it there was no water in it. checked all the fluids no water in them. no check engine light all the gauges reading normal. everything seems normal except for this ticking noise and if i floor it it will only rev to about 3500 while driving. truck is a 2006 with the 5.4 triton
Did you check the spark plug wires? Maybe there is arcing that is giving you the ticking? If you check it out at night you maybe able to see the spark..
My 2 cents
Thread Starter
|
Tuned
Joined: Dec 2005
Posts: 348
Likes: 3
all the coils are secure on the plugs. i thought exhaust leak too but would that cause it to not go above 3500 when i floor it also the ticking gets real loud and is rpm sensitive ie: the higher the rpm's the faster the ticking gets
Lead Driver
Joined: Jul 2004
Posts: 6,950
Likes: 510
From: Foothills, CA
I think all the spark related items would've thrown a CEL. I'm more worried you did get some water in and got enough of a hydrolock to bend a valve. It's definately a ticking and not a knocking sound? Can you narrow it down to a cylinder? A compression or leak-down should find the bent valve...
Did you check your filter box/filter for signs of water? You might also ask this Q under the 5.4 and F150 forums -- there's a ton more 5.4 experts there...
Did you check your filter box/filter for signs of water? You might also ask this Q under the 5.4 and F150 forums -- there's a ton more 5.4 experts there...
Hotshot
Joined: Aug 2006
Posts: 17,398
Likes: 317
From: Whittier, CA
Bill
Trending Topics
Thread Starter
|
Tuned
Joined: Dec 2005
Posts: 348
Likes: 3
the filter was a little damp after i got out but there was no water in the tubing or the box i let the filter dry out and changed the oil and its still ticking . there wasnt any sign of water in the oil though which makes me think i really didnt suck up that much if any water. the coolant doesnt look like it is watered down
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
Top 10 Most Expensive Ford Trucks Ever Sold on Bring a Trailer
Joe Kucinski
2027 Ford Super Duty Buyer's Guide (Every Model, Engine, & Package)
Brett Foote
Top 10 Ford Truck Tragedies
Joe Kucinski
AEV FXL Super Duty - the Super Duty Raptor Ford Doesn't Make
Brett Foote
Lobo Vs Lobo: Proof the F-150 Lobo Should Be Even Lower!
Michael S. Palmer
Ford's 2001 Explorer Sportsman Concept Looks For a New Home
Verdad Gallardo
10 Best Ford Truck Engines We Miss the Most!
Joe Kucinski
2026 Shelby F-150 Off-Road: Better Than a Raptor R?
Brett Foote
2027 Super Duty Carhartt Package First Look: 12 Things You NEED to Know!
Michael S. Palmer
Thread Starter
|
Tuned
Joined: Dec 2005
Posts: 348
Likes: 3
the water level wasnt over the intake the wave created by the truck hit the shore and came back over the hood for like a half a second just long enough to stall me out. and i had to cross the water because the bridge that was there looked like it was about to fall down and my buddy was stuck in the mud on the other side of it
Lead Driver
Joined: Jul 2004
Posts: 6,950
Likes: 510
From: Foothills, CA
the filter was a little damp after i got out but there was no water in the tubing or the box i let the filter dry out and changed the oil and its still ticking . there wasnt any sign of water in the oil though which makes me think i really didnt suck up that much if any water. the coolant doesnt look like it is watered down
I may be wrong about the coils arcing throwing a CEL... Ticking sure sounds mechanical to me...
