I'M New and need help PLEASE!
Thread Starter
|
New User
Joined: Apr 2008
Posts: 2
Likes: 0
I'M New and need help PLEASE!
I have a 1996 Bronco w/ 5.8L 351W EFI. I am looking to get more HP. Factory at 210 is BS now. I am all stock outside no lift w/35"s. I have asked a few mechs and they said Supercharger, (whipple). I am looking for someone who knows the engine and options. I just did the whole inside and the T-case, Trans, and timing is new. Can you guys help me?
FTE Legend
Joined: Jun 2006
Posts: 31,930
Likes: 1,499
From: Ottawa, Ontario
First and foremost, if you haven't already done so you need gears. With that out of the way the next thing to do is replace the whole top end of the motor, heads, cam, and intake, larger injectors, and a tuner to make it all work together. This could put you into the 350hp range depending upon the parts selected, one such combo would be AFR185s, Trickflow R-Series intake with the 75mm TB, Comp Cams 35-349-8, and 30lb injectors.
Super Moderator
Joined: Apr 2004
Posts: 34,495
Likes: 2,809
Before even the first thing, find out if you have smog checks and how they work if you have them. AZ isn't as tight as CA, but you'll be pretty PO'd if you do mods that you have to undo to pass. Call me silly...
Hotshot
Joined: Jul 2002
Posts: 14,285
Likes: 12
From: Bend,OR
i want to see pics of a 96 running 35's with no lift. the fenders gotta be cut to run those.
oh and gears would be huge, and they would be the best bang for your buck.
my 94 runs 4.88's with 35's and at 65mph im at 2200rpms in OD
oh and gears would be huge, and they would be the best bang for your buck.
my 94 runs 4.88's with 35's and at 65mph im at 2200rpms in OD
