AOD Differnences
Thread Starter
|
Junior User
Joined: Sep 2002
Posts: 58
Likes: 0
From: Seattle USA
AOD Differnences
Will an AOD from a 87 4X4 fit in a 84 2x4? Is this a simple swap, or will I have to pull the rear housing to get it to bolt in due to the lack or transfer case? Don't want issues just a simple in and out and if pulling the rear housing is easy then thats okay to. No time to dink around with it!
Thanks for the info!!!
Thanks for the info!!!
Logistics Pro
Joined: Jan 2007
Posts: 3,839
Likes: 107
From: Martinsburg, WV
I may be remebering wrong, but I believe the 4x4 is a short shaft and the 2wd is a long shaft AOD, referring to the length of the output shaft, also the rear housing would be incompatible.
Thread Starter
|
Junior User
Joined: Sep 2002
Posts: 58
Likes: 0
From: Seattle USA
Thats what I thought I had read somewhere else as well. I don't want to mess with that kind of thing. I jsut want to swap it in and out if I am going that route. Thanks for the heads up Archion! The hunt continues!
