overhead informatin display
Thread Starter
|
New User
Joined: Mar 2008
Posts: 14
Likes: 0
overhead informatin display
well gentlemen i took apart my overhead council and i followed the direction given to me by members here and i got it fixed.i live in a small north central Alberta town and could not get pencil soldering gun so i had to do the soldering with a regular soldering gun ,it was chore but i had a brother who was visiting and the both of us got it done.thanx to the guys that gave me the advice.the pictures were the ticket and were the best information that a person could have. thank you again.
Thread Starter
|
New User
Joined: Mar 2008
Posts: 14
Likes: 0
i have a howling rear end thats in the truck that is. i tightened the yoke and and that didn't help; so put screwdriver on the yoke housing and there seem to be a lot of noise coming from the yoke housing.i replaced the bearings and there is a howling coming from there.i guess it must be the pignion then.
