When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
On tiny pic there is an option to resize pic you want to upload, its on the screen when you upload the picture before you click upload you can click the drop down box on next to were it says resize right above upload.
The new arm looks cool too. You're going to have billet all over that thing by the time your done.
I have got to get my turn signals worked out. I ground off the rivet holding the old cam on and I replaced it with the HELP one from autozone but the arm still weighs it down and if I have the arm screwed in my left blinker stays on! damn gravity!! LOL I'm gonna have to break down and buy a whole new switch.
heres a different one that i made tonight...i think that i like it better
i also had an idea for some of these....have gears for the wiper and lights ****...and have one for the shifter too.....the teeth arent sharp....what would look better on the shifter, the gear on the outside or closest to the column?