When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Ok, I got my conversion website page up and running. I will be adding a walktrough guide as well. I need some pictures of stock harnesses among other things. Any refrences would be appreciated. I am going to include steps for all of us who have E4OD trannys, as well as AODE and sticks. 5.0 and 5.8's as well.
I understand that everyone ha done the a3l setup, but it leaves out soo much for the rest of us, I figured I would donate some time. Also I will include info on upgrading to a OBD 2 system, so you can have a universal code reader as well as datalogging and realtime monitoring.
Here is the the site I have started.
"F-150 & Bronco Mass Air Project"
Please give opinions on what you want to have this thing include.
pictures of the stock harness and perhaps the egr and lower intake, with the upper off, not that I expect you to remove the upper intake manifold
umm, brain is runnin on empty right now. just pictures of the harness conectors and where they sit under the hood. Anything that will make for a good piont of refrence.
I have some pics of the MAF conversion harness on my Flickr page, and can get some shots of an EFI 302 from any angle... have one sitting in my garage.