solid axle conversion
Thread Starter
|
New User
Joined: Mar 2008
Posts: 13
Likes: 0
solid axle conversion
I have an 1989 ford f150 and want to install a 79 dana 44 on there. I have been looking at buying the soild axle conversion kit from broncograveyard but does anyone know how to get the most lift out of the solid axle conversion kit.
FTE Chapter Leader
Joined: Mar 2007
Posts: 4,911
Likes: 7
From: Crowville Louisiana
Check out fullsizebronco.com They have a whole forum dedicated to solid axle swaps.
You can do the whole 44 swap with minimumal fab skills for a whole lot less than you could buy the kit from JBG
You can do the whole 44 swap with minimumal fab skills for a whole lot less than you could buy the kit from JBG
Thread Starter
|
New User
Joined: Mar 2008
Posts: 13
Likes: 0
I dont have any fabricating skills but I might have a few people who might can help me. I just need advice on what all would have to be fabricated because I can purchase individually a few things I would need but a few things I wont be able to.
Posting Guru
Joined: Mar 2006
Posts: 1,213
Likes: 0
From: Parma, MI
All depends really...you will need to fab a trac bar and trac bar mounts. Possibly use different coil buckets, as well as change around radius arm drop brackets. Shock mounts may need to be fabricated. And im sure there is more...
