roller conversion, need some help!
Thread Starter
|
Junior User
Joined: Oct 2001
Posts: 55
Likes: 0
roller conversion, need some help!
im planning on doing a roller cam conversion to my truck and i have all the parts except the most important one, the cam! here is my question, ive been researching cams looking for one with some nice low-end and i found one i really like, BUT it has .530" lift. with 1.6 roller rockers, will i have valve-to-piston clearance problems? the full specs of the cam are duration 208/216 @.050 lift: .530"/.530" 9crane cams part# 444211). thanks for the help!
Thread Starter
|
Junior User
Joined: Oct 2001
Posts: 55
Likes: 0
roller conversion, need some help!
ive done a search and read about all the problems i might encounter, but im still willing to tackle it 
those of you with roller ams, which cam are you using??? thanks!
those of you with roller ams, which cam are you using??? thanks!
