Tach problems
Thread Starter
|
Posting Guru
Joined: Jan 2007
Posts: 1,233
Likes: 0
From: shawnee KS
Tach problems
My tach likes to not work when the temps drop. I am very familiar with the process of removing the cluster for room to work on other stuff in the dash, general cleaning, replacing light bulbs, etc. Would I be just as well off to pick up another cluster at a yard? I know that the individual gauges are removeable, so is there something I can clean or regrease in there?
I also would not be opposed to something aftermarket, but I will NOT butcher my dash. It seems that there is nothing offered for this era of trucks for say white faced gauges and things of that nature. Has anyone seen anything for these trucks? Has anyone done anything that came out really nice.
P.S. I like lots of pics if anyone has modified their gauges!
I also would not be opposed to something aftermarket, but I will NOT butcher my dash. It seems that there is nothing offered for this era of trucks for say white faced gauges and things of that nature. Has anyone seen anything for these trucks? Has anyone done anything that came out really nice.
P.S. I like lots of pics if anyone has modified their gauges!
Posting Guru
Joined: Jun 2002
Posts: 2,091
Likes: 3
From: Suffolk, VA USA
I forget exactly who it was, but someone on here did their gauges in white several months back....I think his screename was Fairfield, or something like that. At any rate, it looked really sharp. Took some work though. There were pictures in the string if you've got the time to search for it.
Posting Guru
Joined: Jun 2002
Posts: 2,091
Likes: 3
From: Suffolk, VA USA
Postmaster
Joined: Feb 2008
Posts: 2,658
Likes: 5
From: Out of here
IMO, white face gauges don't look right in these trucks.
It makes it look too modern. The factory tach is only held in with two nuts and is easy to change.
I don't think that there is anything that can be "greased" in them. They are electrical, not mechanical.
I just posted about painting my needles Garnet red and installing Blue LED's. I won't be able to see the LED's until tonight, so the jury is still out on whether I like them or not.
It makes it look too modern. The factory tach is only held in with two nuts and is easy to change.
I don't think that there is anything that can be "greased" in them. They are electrical, not mechanical.
I just posted about painting my needles Garnet red and installing Blue LED's. I won't be able to see the LED's until tonight, so the jury is still out on whether I like them or not.
Posting Guru
Joined: Jun 2004
Posts: 1,635
Likes: 0
From: Niceville, FL.
Make sure the contacts are clean where the wiring harness connector plugs into the printed wiring on the cluster. A pencil eraser and some electrical contact cleaner works well. Also make sure the connector is fully seated into the cluster.
Postmaster
Joined: Feb 2008
Posts: 2,658
Likes: 5
From: Out of here
Originally Posted by Piffery1
A pencil eraser and some electrical contact cleaner works well.
Trending Topics
Thread Starter
|
Posting Guru
Joined: Jan 2007
Posts: 1,233
Likes: 0
From: shawnee KS
Originally Posted by uncle.stosh
IMO, white face gauges don't look right in these trucks.
Waiting to see yours lit up.
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
Top 10 Most Expensive Ford Trucks Ever Sold on Bring a Trailer
Joe Kucinski
2027 Ford Super Duty Buyer's Guide (Every Model, Engine, & Package)
Brett Foote
Top 10 Ford Truck Tragedies
Joe Kucinski
AEV FXL Super Duty - the Super Duty Raptor Ford Doesn't Make
Brett Foote
Lobo Vs Lobo: Proof the F-150 Lobo Should Be Even Lower!
Michael S. Palmer
Ford's 2001 Explorer Sportsman Concept Looks For a New Home
Verdad Gallardo
10 Best Ford Truck Engines We Miss the Most!
Joe Kucinski
2026 Shelby F-150 Off-Road: Better Than a Raptor R?
Brett Foote
2027 Super Duty Carhartt Package First Look: 12 Things You NEED to Know!
Michael S. Palmer
Senior User
Joined: Nov 2005
Posts: 101
Likes: 0
From: Monroe City, IN
I painted a guage cluster white and the needles red it looked good and all that but at night it didn't light up worth a crap I even took out the blue bulb dome colors and tried different colr bulbs but nothing worked that well. As a means to remedy faded needles I painted them with regular white paint and I can see them just fine at night.
As far as the tach not working I read somewhere that one of the elctrical components in the tach assembly will fail after getting too much heat. Causing it to fail
As far as the tach not working I read somewhere that one of the elctrical components in the tach assembly will fail after getting too much heat. Causing it to fail
