When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
the aluminum ones are pretty shnazzy but your looking at 250 bucks. i'll bet you can pick up a heavy old iron one of craigslist for dirt cheap. you just have to decide which type, dual plane, torquer, high rise, imitation chrome finish, etc....
i have an edelbrock performer one.
Last edited by Danger_Dave; Mar 17, 2008 at 10:13 AM.
Reason: giant roast beef vagina
Depends what you want to do with the truck.Any FE 4 barrel intake will work doesnt have to be from a 390.352,390,427,428 etc.Usually quite a few iron ones on ebay.
I had a cast iron one f Ford and an Edelbrock. Thestock Cast one was Better,Got 14 mpg and had a Holley 650 on it.The best part is I picked up both at a scrap yard for $45. Think I still have one in Stock. Hard to find parts for a FE anymore. I miss that truck.
That cast iron 390 intake is close to 80 lbs. Use a cherry picker to lift it off. I noticed when I yanked the cast mani and cast exhaust manifolds off and replaced with Edelbrock alum and headers, the truck felt lighter on the front end.