valve seals
Thread Starter
|
Trailering
Joined: Jan 2001
Posts: 22
Likes: 0
From: Merrillville, In
valve seals
I have a 400 in my garage that only needs valve seals. I was wondering if they are easy to do or not? Do you need special tools and are there any tricks to doing them? I have them already I was just wondering how to get them in.
Nick
shuteme00(No Email Addresses In Posts!)
1979 F-150 4x4 351m/c-6/np205
Nick
shuteme00(No Email Addresses In Posts!)
1979 F-150 4x4 351m/c-6/np205
Moderator
Joined: Jan 2001
Posts: 56,997
Likes: 2,743
From: Virginia
valve seals
1. Rig some way so the valves don't fall in the cylinder
a. compressed air in the sparkplug hole
b. or make sure the piston is up in the cylinder with
rope stuffed in the sparkplug hole.
2. Buy a valvespring compressor tool for assembled engines
a. compressed air in the sparkplug hole
b. or make sure the piston is up in the cylinder with
rope stuffed in the sparkplug hole.
2. Buy a valvespring compressor tool for assembled engines
