98 Expy ABS Wheel Sensor Replacement
Thread Starter
|
Senior User
Joined: Mar 2002
Posts: 101
Likes: 1
98 Expy ABS Wheel Sensor Replacement
My ABS system is intermittently activating on perfectly dry pavement at low speeds. I'd like to replace my ABS wheel sensors but would appreciate some instructions on how to do so. Can anyone help me out? Pics would be awesome if you have them.
THANKS...............
THANKS...............
Logistics Pro
Joined: Oct 2000
Posts: 3,960
Likes: 5
From: All over Texas
The front sensors are located near the rotors...look for an electrical connector. The rear sensor is on top of the differential...again look for an electrical connector. They are very easy to replace.
Good luck.
Good luck.
Thread Starter
|
Senior User
Joined: Mar 2002
Posts: 101
Likes: 1
I was worried the rotors may need to be removed. I think I've had them replaced at least once and the garage needs to pretty much destroy them to get them off. SO THERE IS NO OTHER WAY TO GET THOSE FRONT SENSORS OFF WITHOUT REMOVING THE ROTORS? I replaced the rear sensor not too long ago due to an A4WD issue, so I'm assuming that is fine. Based on my symptoms and what I've read I'm pretty certain I have a front sensor issue.
