Rivet Nightmare's

Reply Subscribe

Thread Tools

Search this Thread

Mar 3, 2008 | 10:13 PM

aregullinjr

Thread Starter

New User

Joined: Mar 2008

Posts: 3

Likes: 0

Rivet Nightmare's

I'm installing a 6" Fabtch 4 link coil over on my 2006 f-250 with 4.0 dirt logic shocks. I have taken all but two rivets out of the frame. On the Driver side of the truck where the new hoop bracket is going there are two rivets that are very stuburn to remove. I don't know how any one would remove these two rivets, there is no room for an air hammer and there are several line literally an inch from the rivets, so a torch is out of the question. Please somebody with some experience help!

Mar 3, 2008 | 10:54 PM

ryaneverk2

Logistics Pro

Joined: Mar 2004

Posts: 4,221

Likes: 3

Welcome to FTE, aregullinjr.

I'd recommend reposting your question in the Brakes/Steering/Suspension section or the Super Duty section. This area is meant more for personal announcements and introductions.

Mar 3, 2008 | 11:26 PM

aregullinjr

Thread Starter

New User

Joined: Mar 2008

Posts: 3

Likes: 0

thanks, I'll make sure to do that right away.

Mar 3, 2008 | 11:54 PM

Fomoko1

Moderator

Joined: Dec 2003

Posts: 97,635

Likes: 2,012

From: Saskatoon, Saskatchewan

Hi, also check out your local TX chapter too: https://www.ford-trucks.com/forums/forum96/
Don't forget to fill in the ''location'' field of your profile!