Port/Polish
Junior User
Joined: Feb 2003
Posts: 94
Likes: 0
From: Red Deer,AB,Canada
i have people come to my shop for stuff like this all the time but they dont like the price so i tell themm about this web site.
http://www.sa-motorsports.com/diyport.aspx
http://www.sa-motorsports.com/diyport.aspx
Thread Starter
|
New User
Joined: Dec 2001
Posts: 12
Likes: 0
From: Osceola USA
yes I had saw that before. I really don't want to spend the money to have a shop port stock heads. I want the Aussie heads, but can't spend the money for them now. So I guess I will just try my luck with the stock heads and see what I come up with thanks,
Postmaster
Joined: Aug 2000
Posts: 3,312
Likes: 1
From: Eldorado Ca. USA
It can cost you big time if you get too carried away. Open up the throats around the valve seat, grind down the exhaust hump (assuming you have one), get a 3 angle valve job. Maybe gasket match the exhaust port to your manifold?
