All in a days work...
Thread Starter
|
Posting Guru
Joined: Dec 2007
Posts: 2,386
Likes: 0
From: North Van BC, Canada. EH!
All in a days work...
This is what I do 5 days a week 
This is what it looked like when I started today. (9am)(I had done half of it yesterday as well)
This is what it looked like at 3:15 (quitting time)
This is what it looked like when I started today. (9am)(I had done half of it yesterday as well)
This is what it looked like at 3:15 (quitting time)
Thread Starter
|
Posting Guru
Joined: Dec 2007
Posts: 2,386
Likes: 0
From: North Van BC, Canada. EH!
Originally Posted by bigrigfixer
So what's all the rebar for? What's getting built?
The whole area is the floor for the New Lodge. They laid the slab in Aug, and told us that we have to keep it clear of snow, as the concrete wont support the weight of the snow. We get on average 25+ ft of snow per season. This is the center of the lodge, the staircase and the hole into the basement is only covered by plywood. So it wont support the weight of the bobcat, and has to be cleared by hand.
here is the "Artists rendition" of the New Lodge.
Thread Starter
|
Posting Guru
Joined: Dec 2007
Posts: 2,386
Likes: 0
From: North Van BC, Canada. EH!
Originally Posted by bigrigfixer
Right. I saw that when I was up there last. Looked to have about 6 feet of snow on it 3 weeks ago.
FTE Legend
Joined: Jan 2006
Posts: 37,918
Likes: 178
From: Princeton, BC
Originally Posted by four-sixty-power
Why is your tank running over a 95 mustang?
Trending Topics
Thread Starter
|
Posting Guru
Joined: Dec 2007
Posts: 2,386
Likes: 0
From: North Van BC, Canada. EH!
Originally Posted by four-sixty-power
So how do I get to work there?
Where in North Van is there?
Where in North Van is there?
Originally Posted by four-sixty-power
Why is your tank running over a 95 mustang?
but seeing as your obviosly offended, i'll change it.
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
2027 Ford Super Duty Buyer's Guide (Every Model, Engine, & Package)
Brett Foote
Top 10 Ford Truck Tragedies
Joe Kucinski
AEV FXL Super Duty - the Super Duty Raptor Ford Doesn't Make
Brett Foote
Lobo Vs Lobo: Proof the F-150 Lobo Should Be Even Lower!
Michael S. Palmer
Ford's 2001 Explorer Sportsman Concept Looks For a New Home
Verdad Gallardo
10 Best Ford Truck Engines We Miss the Most!
Joe Kucinski
2026 Shelby F-150 Off-Road: Better Than a Raptor R?
Brett Foote
2027 Super Duty Carhartt Package First Look: 12 Things You NEED to Know!
Michael S. Palmer
10 Most Surprising 2026 Ford Truck Features!
Joe Kucinski
Thread Starter
|
Posting Guru
Joined: Dec 2007
Posts: 2,386
Likes: 0
From: North Van BC, Canada. EH!
Originally Posted by Zip
Ok this is going to be off topic.
How do I get two quotes in one post?
How do I get two quotes in one post?
Here is the finished part that I started digging. a 24'x16' hole covered by 1/4" plywood... Which is why it needed to be cleared by hand.
Thread Starter
|
Posting Guru
Joined: Dec 2007
Posts: 2,386
Likes: 0
From: North Van BC, Canada. EH!
Originally Posted by Zip
Ok this is going to be off topic.
How do I get two quotes in one post?
How do I get two quotes in one post?
Originally Posted by Zip
Thanks for the help.
The Pacifier
Joined: Jan 2003
Posts: 8,245
Likes: 7
From: Cloverdale, BC
There's an icon at the right end of the thing starting with the B followed by the I. That thing on the end is the thing you use to wrap quote tags around the selected text.
In the first one, after [QUOTE but before the ] you put in = followed by the username you want to quote, with no space in between. It should look like this with no spaces: [ QUOTE = bigrigfixer ] and then at the end is just [ QUOTE ] again with no spaces.
In the first one, after [QUOTE but before the ] you put in = followed by the username you want to quote, with no space in between. It should look like this with no spaces: [ QUOTE = bigrigfixer ] and then at the end is just [ QUOTE ] again with no spaces.