Turbo Size
Thread Starter
|
Senior User
Joined: Jan 2008
Posts: 130
Likes: 0
From: Fruitvale B.C.
Turbo Size
I have been reading around a bit and from everything I have seen I have learned that the stock turbo for a '95 PSD like mine has a 1.15A/R. The motor in my truck has been replaced once and has had the trubo replaced twice. (I have all the best luck lol) Anyway, the turbo that is in my truck right now is a Garrett with a 1.10A/R stamped on the side. I was wondering if this turbo is bigger or better than the stocker and if so by about how much?
Fleet Mechanic
Joined: Oct 2003
Posts: 1,764
Likes: 0
From: CentralEastern Utah
For a stock turbo the compressor side is a 1.10 a/r. The exhaust housing is a 1.15 a/r...Like you stated. I 'm sure you read the size of the compressor side. Check the exhaust housing to see if it is also the stock size.
